Blog
Wireless Cold Spark Fountain Control: Individual, Group, and All-at-Once Activation Explained
Event equipment guide · Wireless control
Individual control selects one position; group control selects a defined set; all-at-once control selects every intended position for the same cue. Sequence control adds an order between cues. Before buying a wireless cold spark fountain system, confirm which of these actions the supplied controller and receiver configuration actually support. Base count alone does not establish independent channel count.
“Wireless remote included” tells you how a command is sent. It does not explain which bases will respond, whether a sequence runs automatically, or whether the system fits your event plan.
This guide explains those buying questions for insert-based fountain control bases. It is a control-selection guide, not a pairing or activation procedure.
What do the different wireless control modes mean?
Start with the outcome you need rather than the number of buttons on a remote. One button might select a single receiver, a shared group, or an all-unit command, depending on the equipment’s design and assignment.
Individual
One chosen position is selected.
Group
A chosen set of positions is selected together.
All at once
Every intended position is selected for the same cue.
Conceptual selection examples only. Dark markers indicate selected positions; outlined markers are not selected. Numbers identify example positions, not product channels, remote buttons, or an operating layout.
| Mode | Desired result | What to confirm |
|---|---|---|
| Individual | Select one intended base while the others remain unselected. | Can each required position be addressed separately in this configuration? |
| Group | Select a defined subset together. | Are those groups supported, and are assignments fixed or configurable? |
| All at once | Select all intended bases for one coordinated cue. | Which receivers respond to the all-unit command, including any other compatible equipment nearby? |
| Sequence | Select positions or groups in an intended order. | Is the order created manually, preset, or programmable? What timing controls are documented? |
A sequence is not necessarily an automatic show
“Sequential” can describe the resulting order without explaining how the operator creates it. A series of separate manual commands is different from a controller running a timed sequence after one command. Neither wording establishes synchronization to music or a programmable show timeline.
If you need a specific pattern, describe it in plain language and ask how the exact system would support it. Request the relevant controller documentation rather than inferring the feature from a promotional video.
Why do eight bases not automatically mean eight independent channels?
A base is a physical unit. An independently selectable control assignment is a separate capability. Several receivers may respond together in a supported configuration, so the number of objects in the box is not enough to tell you how many selections are available.
For example, eight positions divided into two selectable groups of four are different from eight individually selectable positions. Both involve eight bases; the control requirement is different. This is a conceptual comparison, not a statement about how a particular kit is shipped.
Ask for a clear explanation of which receivers respond to each command. For your event, the useful question is: “Can I select this group without selecting the other group?”
If you are still deciding how many physical positions your event requires, read four vs. eight cold spark fountain bases. Settle the position count and the control requirement together before ordering.
What do the Any Case Gear base-system listings state?
The linked 4-base and 8-base listings describe handheld wireless control, simultaneous and selective activation, and sequence use. Their specification tables list an approximate controller range of 70 meters (230 feet) and one 9V battery per base, excluded from the basic offer.
Those descriptions do not provide a complete command-to-receiver map or establish a programmable sequence with adjustable timing. Confirm those details for the supplied configuration if your event depends on them. The benefits copy also uses “beyond 70 meters,” while the table says approximately 70 meters; treat this as a listing specification to clarify, not a measured guarantee for your venue.
How should you interpret wireless range and power?
Range is not a venue-performance guarantee
Ask what conditions the advertised range assumes and have the responsible operator assess the intended operating position under the manufacturer’s instructions. Walls, intervening structures, people, and the wider wireless environment are conditions to discuss; do not translate the listed distance into a guaranteed result through obstacles.
Keeping the operator farther away does not by itself establish an acceptable operating location. Communication reach, the operator’s ability to assess the area, and the equipment’s operating requirements are separate considerations.
Wireless control and battery power are different specifications
“Wireless” describes the command link. It does not automatically describe the equipment’s power source. Confirm base power and remote power separately, including battery type and what is supplied. Likewise, wireless handheld control does not establish DMX compatibility.
For a comparison with powered machines and their control options, see the base-system vs. powder-fed machine guide.
Write the event requirement before choosing the remote
Give the supplier and operator a short control brief. It is easier to evaluate a defined task than a request for “more control.”
Example requirement: We have an entrance moment and a first-dance moment using different preset positions.
Selection needed: Each moment’s group must be selectable without selecting the other.
Timing needed: State whether separate manual cues are acceptable or an automatic sequence is required.
Equipment to confirm: Supplied remote set, receiver assignments, expansion compatibility, and documented operating limits.
Evidence requested: Relevant instructions or a configuration explanation for the exact kit being supplied.
This brief does not prescribe a specific layout or pairing method. The operator and venue still need to confirm the actual plan. For vendor coordination and cue timing, continue to our wedding entrance and first-dance planning guide.
Keep selection, effect duration, and repeat cues separate
Selecting a base is not the same as adjusting the effect produced by its consumable. Do not assume the remote changes insert height or duration, pauses a used insert, or provides an emergency-stop function. Ask what any stop-related control actually does for the exact equipment and consumable.
If an event needs a later cue from the same position, include consumable replacement and operator preparation in the plan. The presence of another remote button does not make a single-use consumable reusable.
Ask these questions before ordering
- What is supplied? Identify the remote model, number of remotes, and receiver configuration.
- What responds to each command? Confirm individual, group, and all-unit behavior for the intended setup.
- How does sequencing work? Clarify manual operation, presets, and any documented timing controls.
- Can this kit work with existing equipment? Confirm compatibility rather than relying on appearance, brand, or a matching frequency claim.
- What happens around other systems? Ask the supplier about intended receiver selection and the documented method for managing nearby compatible equipment.
- What does the event require? Agree on power, operating position, consumable allocation, and the operator’s verification process.
A communication rehearsal can confirm who gives the cue and who can hold it without activating effects. Equipment checks and any live tests belong to the responsible operator’s documented process.
Common questions about wireless fountain control
Can I activate every base together?
The linked listings describe simultaneous activation. Confirm which bases respond to the supplied controller’s command in your actual configuration, particularly if more than one kit is involved.
Can an eight-base kit create eight independent cues?
Do not infer that from the unit count. Ask for the exact receiver assignments and independently selectable positions supported by the supplied configuration.
Does sequence mode mean automatic timing?
Not necessarily. Ask whether the order comes from separate manual commands, a preset sequence, or a programmable controller. The terms are not interchangeable.
Can two four-base kits share one remote?
Confirm the exact equipment’s compatibility and supported configuration before planning this. Matching product appearance or a stated frequency alone is not enough to establish shared operation.
Does a remote let me stop an active insert?
Do not assume it does. Confirm the equipment and consumable instructions. A control that inhibits another command is not necessarily a way to stop an effect already in progress.
Choose the control behavior your event needs
Compare the base systems, then send your position and cue requirements so the supplied configuration can be checked against the plan.
Need a specific group or sequence? Ask Any Case Gear to confirm the control configuration.
Sources and scope: Product-specific details use the linked 4-base and 8-base listings, checked September 26, 2026. Control diagrams are conceptual examples, not actual channel maps. Original editorial images are AI-generated illustrations, not customer-event photos, configuration evidence, or performance tests.